CS Nitrogen Gas Spring Series-Precision

CS Precision Nitrogen Gas Spring series:

• Highest forces(up to 18300 daN)
• Short strokes(10~50mm).
• Total protection from fluids required.
• Connection available through connector KNCS 1/8" Gas.
• CSE: Side filling port 1/8" Gas.

CS Series

Model	Force(da N)	Body(mm)	Repairable	Connectable	Filling Port
CS 400	400	25	YES	NO	M6
CS 420	420	25	YES	NO	M6
CSE 420	420	25	YES	NO	M6
CS 750	750	32	YES	NO	M6
CS 770	770	32	YES	NO	M6
CSE 770	770	32	YES	NO	M6
CS 1000	1000	38	YES	NO	M6
CSE 1000	1000	38	YES	YES	1/8" Gas
CS 1800	1800	50	YES	YES	1/8" Gas
CSE 1800	1800	50	YES	YES	1/8" Gas
CS 3000	3000	63	YES	YES	1/8" Gas
CSE 3000	3000	63	YES	YES	1/8" Gas
CS 4700	4700	75	YES	YES	1/8" Gas
CSE 4700	4700	75	YES	YES	1/8" Gas
CS 7500	7500	95	YES	YES	1/8" Gas
CSE 7500	7500	95	YES	YES	1/8" Gas
CS 11800	11800	120	YES	YES	1/8" Gas
CSE 11800	11800	120	YES	YES	1/8" Gas
CS 18300	18300	150	YES	YES	1/8" Gas
CSE 18300	18300	180	YES	YES	1/8" Gas

Pressure medium	N2
Max.charging pressure	150bar
Min.charging pressure	20bar
Operating temperature	0°~110°
Max.Piston rod speed	0.5m/s
Refillable	Yes
Connectable	No
Re: A 10% stroke length allowance is recommended.
Special Nitrogen Gas Spring out of catalogue are manufactured under order.

Technical Features

Safety Requirements
Nitrogen Gas Spring are containers charged with nitrogen gas at maximum pressure of 150bar.
Do not manipulate any part of Nitrogen Gas Spring without being sure that it is completely discharged.Or you are trained in handling the process of unload.
Azol Nitrogen Gas Spring meet European Community Directive 97/23/CE related to Pressure Equipment Devices(PED). And CE Mark identification only will be laser etched according to the mentioned Directive.
Never handle Nitrogen Gas Spring by personal without the appropriate training, and always following the outlined operating instructions from Azol Nitrogen Gas.